The Evolution Of Joinery
Joining has always been a slow, difficult process. Never again, thanks to the Festool
Domino joining system. The system consists of the Domino joiner and pre-fabricated,
beech and sipo Domino tenons. The Domino joiner, with its revolutionary cutting
method, simple indexing features and adjustable mortise sizing, makes flawless mortises
every single time. The Domino tenon is equally as impressive - it is 100% rotation-proof
and far stronger than either biscuits or dowels. It also has a large gluing surface
area for extra strength.
If you still have questions, please feel free to
contact us or your preferred
Festool dealer for more information.
Features & Benefits.
Patented Routing Principle
The spiral cutter rotates and oscillates to create perfect mortises.
Mortise Width Adjustment
Adjusting the width of the mortise allows for easier alignment when joining panels.
Positioning
With an adjustable fence angle, retractable stop flaps, adjustable cutter height
with step gauge, and precise mortise depth stop, the Domino joiner enables precise
mortise placement and spacing.
Pivoting Fence
Fence creates angled mortises from 0-90° with positive stops at 22.5°,
45°, 67.5°.
Depth Control
Quick, precise adjustment for five different mortising depths, relative to the size
of the tenon required for the application.
Stepped Height Stop
7 different step positions for different material thicknesses for fast and easy
fence height adjustment.
Dust Extraction
Your mortises are clean and ready for glue when the Domino is used in combination
with a dust extractor. Proper dust extraction greatly extends cutter life.
Carbide Tip Spiral Bit
Durable, long-lasting bit withstands 5,000-14,000 joints depending on material.
Rapid Bit Change
Means you can change a bit in under 30 seconds to match desired tenon size.
Photo Gallery.
Videos from Domino DF 500 Owners.
Specifications.
|
|
|
|
Model
|
DF 500
|
|
Product No.
|
574 332
See Dealer
|
Set Version Product No.
(Includes trim and cross stops)
|
574 432
See Dealer
|
|
Available Domino Cutters
|
4, 5, 6, 8, 10 mm
|
|
Miters
|
0-90°,
Stops at 22.5°, 45°, 67.5°
|
|
Power Consumption
|
420 Watts
|
|
Weight
|
7.0 lbs.
|
|
Mortising Depth
|
16, 20, 22, 25, 28 mm
(5/8" to 1-1/8")
|
|
Fence Height Scale
|
5 - 30 mm
(13/64" to 1-3/16")
|
|
Includes Domino DF 500 D5 Cutter*
|
|
|
Plug-It Power Cord
|
|
|
Support Bracket
|
|
|
Wrench
|
|
|
T-LOC Systainer SYS 2
|
|
* Please note that cutters are not interchangeable between Domino models. Cutters are specific to the Domino DF 500 or Domino XL DF 700.
While effort is made to provide accurate information, Festool is not responsible
for typographical errors. Prices and content are subject to change without notice
and prices are only valid for merchandise shipped within the United States.